https://unimatik.hu/wp-content/uploads/2023/12/call.png   +36-30/5731-203     Give me call!

production and installation of food industry machines, equipment and technological lines

Green beans processing line

https://unimatik.hu/wp-content/uploads/2023/10/Zoldbab-feldolgozo-vonal-1.jpg

The line is used to process green beans. The raw material arrives in trucks, which are poured in the receiving bunker. From the receiving area, a conveyor belt carries it out to an air selector and from there it goes to the bean washing equipment, which removes dirt and debris. After that, the raw material is sent to the optical sorting machine, which scatters low-quality, discolored green beans.

Afterwards, the clusters of green beans are broken down and the ends are cut off. From there, the application elevator carries it to the slicing machine. Belts convey the sliced green beans to the pre-cooking equipment, after which the raw material is filled into bottles, then capping. After closing, sterilization takes place in the autoclave, the baskets of which are loaded by the Magnetic Basket Loader and then unloaded by the Magnetic Basket Unloader. Packaging takes place after sterilization.

Pet food production

Sweet corn processing

Green pea processing

Green beans processing

Cucumber processing

Jam, Fruit pith processing

Cherry, plum processing

Other vegetables

  • Info

    Carrot, zucchini, pepper, eggplant, beetroot, cabbage, pumpkin, etc.

Snail processing

Milk & cheese processing

Other food processing

All machines

Packaging machines

Magnetic depalletizer:

The depalletizer is located in front of the technological line, where it is placed. The depalletizing machine breaks down the unit load of the filled cylindrical containers and places them on a buffer table. The metal box is placed on the buffer table by a magnetic head. The frame of the depalletizing buffer table is made of bent stainless steel sheet with plastic tape. The frame structure of the magnetic head is also made of stainless steel, on which the carriage moves the magnetic head. The magnetic head is moved up and down by a pneumatic cylinder. We solve the lifting and lowering of the pallet with a chain hoist. The empty pallet is picked up by a roller track and collected separately. The equipment can handle pallets of different sizes. The machine is completely made of stainless steel. The machine can work in both automatic and manual mode. The machine is equipped with a PLC automation controller. 

               

Magnetic palletizer:

The Palletizer forms a unit load from filled cylindrical containers. The metal box and the closed bottle are placed by a magnetic head from the buffer table onto the pallet. The machine places a paper and spacer between the layers manually or automatically. The frame of the stop table of the palletizing machine is made of bent stainless steel with a strap with plastic members. The frame structure of the magnetic head is made of stainless closed section and bent U-iron, with a magnetic head moving carriage. The magnetic head is moved up and down by a pneumatic cylinder. The pallet is raised and lowered with a chain hoist. The finished unit load is removed from under the magnetic head by a roller track. The machine is completely made of stainless steel. The machine can work in both automatic and manual mode. The machine is equipped with a PLC automation controller. 

               

Magnetic basket loader:

The equipment is suitable for unit loading of filled, magnetizable metal boxes or bottles sealed with a metal plate. Suitable for placing filled containers in the autoclave basket. Its high performance is even suitable for serving several packaging lines. The intermediate paper can be loaded manually or automatically. The products to be loaded are crowded from the conveyor to the buffer table. When the cycle starts after congestion, the buffer table stops and the magnetic head catches the product. It is then placed on the freely lifting bottom of the forward basket. After inserting the intermediate paper, the bottom of the basket sinks down one level, and meanwhile the magnetic head returns to its original position, from where the process is repeated. When loading is complete, the loading cycle ends. It’s continuous. The machine is completely made of stainless steel. The machine can work in both automatic and manual mode. The machine is equipped with a PLC automation controller.

         

Magnetic basket unload:

The task of the machine is to place the filled containers from the autoclave basket onto the buffer table and transport them from there. Its high performance is even suitable for serving several packaging lines. The intermediate paper can be removed from the layers manually or automatically. The product to be unloaded is in the basket. At the beginning of the cycle, the magnetic head grabs the product from the basket and places it on the buffer table, which moves on and delivers the dishes. After removing the intermediate paper, the bottom of the basket rises one level, and meanwhile the magnetic head returns to its original position, from where the process is repeated. The cycle is continuous. The machine is completely made of stainless steel. The machine can work in both automatic and manual mode. The machine is equipped with a PLC automation controller.

         

Receiving and emptying machines

Receiving bunker:

The receiving bunker is suitable for the reception and uniform dosing of raw materials (green peas, tube corn, root vegetables) delivered in bulk on a tipper truck.

   

Cooking and cooling equipment

Drum Blancher:

The equipment is used for cooking canning and refrigeration products (green peas, corn, etc.) in hot water. All structural parts of the equipment are made of stainless steel. The tub is filled to the level determined by the overflow and is heated to the temperature of pre-cooking. The product fed into the feeding hopper of the machine falls into the perforated spiral-leaf drum, which is immersed in hot water and rotates at a constant speed. The temperature of the water space is kept at the set pre-cooking temperature by the automatic temperature control valve. The auger leaves of the rotating drum transport the product in the hot water towards the dispensing end at a uniform speed. The speed of passage through the machine can be adjusted to the desired value by adjusting the speed of the gear unit with the pre-cooking frequency controller. At the dispensing end of the auger drum, 6 product extraction vanes located radially inside the drum deliver the product to the dispensing hopper. The excess water leaves the tub through the two overflows. We produce it in different capacities.

   

Classification and separation machines

Green bean snipper:

The equipment declustered and partially cleaned green bean pods. The product passes through the receiving hopper into the shoveled receiving end of the rotary drum, and then passes through the machine at a speed corresponding to the angle of inclination. During passage, the sleeve ends protruding through the gaps of the segments that make up the drum’s casing are cut off by knives clamped to the casing by springs and the cluster is broken. Garbage falling through the gaps and the cut tips fall into the collection trough, from where they can be removed with a belt. The tip-cut sleeves passed through the drum exit through the drum out

 

Green Bean cutter:

The equipment performed tip cutting and partial cleaning of green bean pods. The product passes through the receiving hopper into the shoveled receiving end of the rotary drum, and then passes through the machine at a speed corresponding to the angle of inclination. During passage, the sleeve ends protruding through the gaps of the segments that make up the drum’s casing are cut off by knives clamped to the casing by springs and the cluster is broken. Garbage falling through the gaps and the cut tips fall into the collection trough, from where they can be removed with a belt. The tip-cut sleeves passed through the drum exit through the drum outlet.

 

Air selector:

A légszelektor alkalmas a konzerv- és a hűtőipar területén a szemes nyersanyagokból /borsó, kukorica stb./ a kisfajsúlyú és nagy légellenállású szennyeződések légárammal történő eltávolítására. A légszelektornak része egy terítő vibrátor. A teljesítménye különböző, lehet 5-15 tonna/óra közötti. 

     

Vibration table:

Vibration table a very important role in the technological processing of the food industry, but especially in the refrigeration and canning industry. Its task is to arrange the individuals of various vegetables and smaller fruit varieties in a solid state to be processed in a plane, in a uniform layer thickness, to the next machine and equipment of the technological processing line. allowance. Its special task may also be the separation of water from the raw material, – surface water reduction – and waste separation. If the vibrator is equipped with a water jet, in that case the removal of smaller dirt, with this function, it also performs the task of washing and cleaning well.

       

Product transport machines

Swan-neck elevator:

The task of the Swan-neck elevator is to bridge the height differences between the individual technological equipment during the technological processing of the solid, different types of vegetables and fruits to be processed. In almost all cases, this bridge means bringing the raw material to be processed, the product, from a better technological level to a higher technological level. Elevators can be installed anywhere in the technological production line. It is made with a belt with plastic members and a paddle.

                 

Bucket elevator:

Its task is to transport various vegetables and fruits from one technological machine to another technological machine means transport between machines at different levels. The equipment is made of stainless steel.

        

Conveyor belt machine:

Its task is to provide the opportunity to manually remove individuals from the solid state of different types of vegetables and fruits to be processed, as well as to transport the products from one technological machine to the next. Conveyor belts can be installed anywhere in the technological production line. The belt can be made of PVC or plastic.

                 

Glass dispenser-applicator:

The task of the glass dispenser-sender is to transport empty or filled bottles and boxes, and to bridge level differences. The equipment transports the caught dishes at 90 degrees from one technological machine to the next technological machine. It is made of stainless steel.

                 

Glass-Box Conveyor Track:

Continually operating glass, box and bottle conveyor tracks are the most common in the food industry, but especially in the canning, soft drinks, and beer industries. They are used to transport empty or filled jars, bottles and box. Its task is the continuous transport of packaging materials (glass, metal cans, plastic bottles) between the machines and equipment of the technological line. There can be straight and curved tracks. They can be of different widths and lengths. It can be single-track or multi-track.

                 

Conveyor belt:

Its task is to transport solid, different vegetables and fruits to be processed from one technological machine to the next. Conveyor belts can be installed anywhere in the technological production line. It can primarily be used to transport crushed corn and green peas. Deliver products quickly and in large quantities. It is made with a PVC material belt and in different sizes.

           

Loss-free elevators:

Installed in the processing lines of canneries and refrigeration plants, the equipment is suitable for the loss-free delivery of various types of products. Its construction enables simple and safe handling, reliable long-term operation and minimal energy consumption. Its installation is simple, it can be easily connected to a production line. It is primarily suitable for transporting crushed corn, green peas and diced vegetables. It is made in stainless steel. Different sizes are produced.

     

Puffer table:

The task of the buffer table is to continuously transport packaging materials of different sizes (canning bottles, metal cans, beverage bottles) in accordance with the requirements and regulations of the processing technology, and to collect them in front of various very important technological machines, so-called buffering. The collection and buffering is necessary so that the loss of production due to minor technical errors occurring at individual technological machines does not occur at the leading machines of the technological line, and ultimately the capacity utilization of the technological line is maximized. The buffer table is made with a belt with plastic members.

                 

Cleaning and washing machines

Bean washer:

As cleaning equipment, the bean washer plays a very important role in technological processing in the food industry, but especially in the refrigeration and canning industries. During the technological processing of solid, mainly green beans to be processed, its task is to remove impurities from the raw material. The equipment is made of stainless steel.

Ready product washing equipment:

The washing machine is installed between two box conveyor tracks. The washer consists of two parts, during which the first part is washed with secondary water, and during the second wash it washes the finished product from the bottom and top. The water circulation pump circulates it.

                 

Jar blowing and cleaning:

Spiral jar blowing and cleaning machines play a very important role in the technological processing of the food industry, especially the canning industry. Their task is to examine the pre-filling rinsing of various packaging bottles entering the technological line. The amount of water required for rinsing is taken from the technological water system using network pressure. It can be used for bottles of different sizes.

           

Filling machines

Liquid filling machine:

Continuously operating liquid filling machines a very important role in technological processing in the food industry, but especially in the canning industry. Its task is to provide the appropriate amount of juice for the various vegetables and fruits to be processed, after placing them in the packaging material (glass, box). The filling of the filling juice and delivery to the packaging material is done by gravity, which is why the name „gravity” draining is also common in professional circles. From above, evenly, on a layer of film, draining pouring juice flows into the packaging material passing below until it is full. The extra juice is returned to the processing and pouring juice system for reuse. The machine is made of high-quality stainless steel.

           

Filler of vibrating:

The task of the vibration filling machine is to place and fill different types of vegetables and fruits in a solid state to be processed into packaging material (glass, box). The machine is in continuous operation. During filling, the raw material enters the packaging material without the use of manual force, by machine. The filling machine is made of four main units: feeder, filling part, transporter and returner. The equipment is made of stainless steel.

       

Volume filler machine:

Volume filling machine: The machine is suitable for filling hard, half-piece products / peas, corn, corn, etc./ into boxes or bottles. The frame structure of the machine is made of stainless acid-resistant material, which contains all the drive units:
– wheel unit;
– charging and dispensing plates; upper plate, which regulates the amount of product with the help of telescopes and flywheels; the top plate is fixed on a wheel.
– lead and lead star.
The conveyor belt built on top of the table conveys the product to the dosing auger, which has a variable classification to facilitate the easier feeding of the boxes. The product is placed on the upper plate, which is placed above the boxes, or in the filling cylinder, and a vibrator or applicator fills the product into the device to be filled. The two filling plates move on the axis and open during the filling stage, ensuring that the product is filled into the boxes. In the filling section, an automatic plate is installed, which is connected to a driver and only allows charging when there is a device to be charged under the charging head. A vibrator is placed above the boxes, which ensures even filling of the product. The machine is made with different numbers of heads: 28-44-48-52-60, depending on the power of the machine. The machine is made with PLC automatic control.

          

Capping machines

Glass Capping Machine:

The task of the machine is to continuously close the bottles. The machine can be used for glass and cap of different sizes. The machine is equipped with a magnetic cap feeder, which automatically feeds the tiles to the capping machine. The machine is made of stainless steel.

          

Metal box Capping machine:

The task of the machine is to continuously close the boxes. The machine can be used for boxes and cap of different sizes. The machine has a cap feeder, which feeds the cap to the capping machine. The machine is made of stainless steel.

           

Magnetic cap feeders:

The magnetic cap feeders automatically transfers the cap towards the capping machine. The cap is brought from the container to the chute by a magnetic belt, through which the cap is transferred to the capping machine. The equipment is completely acid-proof, except for the gear unit. The cap feeder is automatic and its speed is adjustable.

            

Other processing machines

Agitator tank:

An agitator tank is used to mix, heat and add additives to various food industry liquids. The mixing tank is a cylindrical vessel with a vertical axis on three tubular legs, topped with a stirrer directly driven by an electric motor. The cylindrical shell of the vessel is stiffened by a semi-flat sheet lid on top, and the bottom is closed by a shallow convex vessel bottom. The electric motor that rotates the mixer is located on the flanged, stiffened flat cover. The other half of the tank is closed by an open lid, which makes it easier to handle and clean the tank. The vessel is surrounded by a heating jacket on the outside, so steam heating enables the materials in the vessel to be heated. Hot surfaces are covered with thermal insulation. The tank has the technologically necessary stubs. A propeller stirrer is built into the vessel to mix the materials in the vessel. The entire equipment (with the exception of the electric motor and gear) is made of stainless, acid-resistant steel.

                 

Heatable mixing tank:

The mixing, heatable tank is used for mixing and heating various food industry liquids and mixing in additives. The mixer tank is a cylindrical vessel with a vertical axis standing on three tubular legs, with a mixer directly driven by an electric motor on top. The cylindrical shell of the vessel is stiffened by a semi-flat sheet lid on top, and the bottom is closed by a shallowly convex vessel bottom. The electric motor that rotates the mixer is located on the flanged, stiffened flat cover. The other half of the container is closed by an open lid, which facilitates the handling and cleaning of the container. The vessel is surrounded by a heating jacket on the outside, so steam heating enables the materials in the vessel to be heated. Hot surfaces are covered with thermal insulation. The tank has the technologically necessary stubs. A propeller mixer is built into the vessel for mixing materials in the vessel. The entire equipment (with the exception of the electric motor and gear unit) is made of stainless, acid-resistant steel.

                 

TODAY

MESSAGE US

Fill out the form on our website today to start developing your food business and get ahead of the competition!

 

15 + 13 =

Address

4400 Nyíregyháza, Szélsõbokor 10/b

https://unimatik.hu/wp-content/uploads/2024/02/facebook_851x851.png      https://unimatik.hu/wp-content/uploads/2024/02/linkedin-orange.png

2023 © All rights reserved! | Privacy Statement | made by legyenszeplapod.hu